Search

If You Call This A Hydrostatic Test, You're Wrong (And Here's Why)

WATCH THE VIDEO

https://www.youtube.com/watch?v=oq9u6fEZi2Y

Homebuyers are always advised to have the plumbing system of their prospective home thoroughly tested for slab leaks before paying for the house or signing a mortgage. Similarly, homeowners call plumbers to perform the same test if they suspect leaks under their slab. This test is known as a sewer water test, and it’s the first step of leak detection.

However, some people and even a few plumbers call it a hydrostatic test. But they are wrong. 

A Sewer Water Test Is Not a Hydrostatic Test

A sewer water test is carried out after installing the plumbing system or later to see if there is a problem with the house’s sewer lines or water lines.

When testing the sewer lines, a test ball is inserted at the two-way clean outs and inflated. It’s then inflated to restrict any flow within the lines. After that, the sewer lines are filled with water up to the slab level and left for about 15 minutes. If the water level does not drop, the sewer line is fine, but if it doesn’t hold, that points to a leak.

To perform a water test is even simpler. A pressure gauge is connected to a hose bib in the house to take the city water pressure reading. Water is then shut off at the meter, and the pressure is observed for about 15 minutes. If the water pressure holds, the water lines are not leaking.

Since no external pressure is applied to the sewer line or water line when performing this test, we cannot call it a hydrostatic test. A hydrostatic test is a pressurized water test used to measure the integrity of equipment such as boilers and gas cylinders that hold liquids or gases. The water is pressurized using a hydraulic pump to a predetermined pressure to see if that pressure holds.

Zero external pressure means the sewer water test cannot damage anything under the house. It simply tests if the lines are doing what they are designed to do — hold water.

Next Step: Leak Detection and Leak Locating

If the house fails the sewer water test, the next step is to find the leak and fix it. For this, you’ll need the best leak detection systems out there. You can find all the leak detection equipment you need at  LeakPro®. Contact us today to order your  LeakPro® detection equipment

You can also watch Roger perform sewer water tests and other plumbing repairs on his YouTube channel to learn more. 

Most people don’t think about their plumbing system often. They are just happy it works. However, if problems like slab leaks occur, they may stay hidden for a while and damage your house while at it. They are also not a quick fix; the pipes are buried under your slab, and it
Plumbing repairs are some of the priciest repairs homeowners may have to shoulder, especially in cases where the whole plumbing system has to be replaced. However, a good plumber with the right equipment can perform a leak detection test, analyze the damage, and
Did you receive a water bill that is higher than usual? Or has there been a drop in water pressure in your home? That may point to a leaking slab under your foundation. But do slab leaks cause foundation problems? Unfortunately, the answer is yes.
Slab leak repairs are some of the most expensive plumbing repairs, and as a homeowner, you may want to know some of the ways you can save money while getting the best results. Plumbers may also want to know what options they can give their clients to reduce plumbing costs without compromising the quality of the repairs.
If you are buying a home in Texas, you may have come across the Addendum for Authorizing Hydrostatic Testing in the TREC residential contract. The addendum states that the buyer will pay for the hydrostatic test, and should the test damage the house, it allows the buyer and the seller to decide who will pay for the repairs.
When buying a house, one can get carried away by the excitement. As soon as the home inspector gives a thumbs up, new buyers are usually ready to sign the mortgage or pay for the house. But here’s the problem; home inspectors don’t have any plumbing knowledge to advise
Slab leaks are every homeowner’s worst nightmare. They can cause significant damage to your home and are quite pricey to detect and fix. It’s always wise to have your plumbing system regularly checked by a professional plumber to avoid slab leak issues creeping on you. If you already have a slab leak, getting it fixed as quickly as possible will save you a lot of money in the long run.
Homebuyers are always advised to have the plumbing system of their prospective home thoroughly tested for slab leaks before paying for the house or signing a mortgage. Similarly, homeowners call plumbers to perform the same test if they suspect leaks under their slab. This test is known as a sewer water test, and it’s the first step of leak detection.
Typically, there are three types of leaks that plumbers often deal with; water leaks, sewer leaks, and gas leaks. There are different ways of finding them, and each requires specific equipment and knowledge. So, how are plumbers able to accurately identify leaks in the pipes buried deep under the house?